Zitierlink: https://doi.org/10.1016/j.jmrt.2023.06.175
Dateien zu dieser Ressource:
Dokumentart: Article
Titel: Mixed mode brittle fracture of stereolithographic 3D-printed parts
AutorInn(en): Khosravani, Mohammad Reza 
Frohn-Sörensen, Peter 
Engel, Bernd 
Reinicke, Tamara 
Institut: Department Maschinenbau 
Schlagwörter: Additive manufacturing, Mixed mode I/II, Fracture, SLA, DIC, Additive Fertigung
DDC-Sachgruppe: 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Erscheinungsjahr: 2023
Publikationsjahr: 2023
Auch erschienen: Journal of materials research and technology ; 25, S. 3177-3188. - https://doi.org/10.1016/j.jmrt.2023.06.175
Zusammenfassung: 
Technical advances in additive manufacturing (AM), also known as three-dimensional (3D) printing, have led to applications of this technology in creation of end-use items. Consequently, performance and the mechanical strength of AMed parts have become of significant importance. In this research, fracture behavior and crack propagation of AMed cracked plates are investigated. To this aim, the stereolithography (SLA) technique is used to fabricate square plate specimens with a hole in the center and radial cracks that started at the perimeter of the central hole. Here, full range of mixed-mode fracture (from pure mode I to pure mode II) are obtained by altering the angle between the crack and the applied load. We used the finite element method to determine stress intensity factors. This study deals with a series of experiments on 3D-printed cracked plates to study mixed-mode fracture and crack propagation in brittle fracture of SLA 3D-printed components. Additionally, the digital image correlation technique was used to determine strain field on the surface of the specimens. As SLA is one of the most commonly used concepts in polymer 3D printing and has garnered significant attention for fabrication of complex structural elements, the outcomes of this study are useful for next developments and innovative designs of 3D-printed polymeric components.
Beschreibung: 
Finanziert aus dem DFG-geförderten Open-Access-Publikationsfonds der Universität Siegen für Zeitschriftenartikel
DOI: https://doi.org/10.1016/j.jmrt.2023.06.175
URN: urn:nbn:de:hbz:467-25712
URI: https://dspace.ub.uni-siegen.de/handle/ubsi/2571
Lizenz: http://creativecommons.org/licenses/by-nc-nd/4.0/
Enthalten in den Sammlungen:Geförderte Open-Access-Publikationen

Diese Ressource ist urheberrechtlich geschützt.

Zur Langanzeige

Seitenansichten

239
checked on 25.12.2024

Download(s)

58
checked on 25.12.2024

Google ScholarTM

Prüfe

Prüfe


Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons Creative Commons